Petroleum Testing Instruments

Product Details:

Saybolt Viscometer Apparatus: Made as per ASTMD-88 specifications with Universal and FurolJets made of Stainless Steel. Stirring is done by hand with turn table arrangement (without Strainer, with drawl Tube and glass wares).Suitable to operate on 220 Volts AC mains.

Product Details:

Redwood Viscometers are designed for viscosity tests of petroleum Products. They confirm to requirements of IP 70 (Former). Two adaption of RedWood viscometer are available No. 1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No. II for liquids whose flow time exceeds 2000 seconds.The complete out fit comprises Stainless steel bath with electrical heating arrangment suitable to operate at 220Volts AC Mains with tap,oil cup with precision stainless steel jet, cup cover, ball valve, thermometer-clip. Stirrer and M.S.Sheet stand

Product Details:

High Temperature Dropping Point Apparatus

Applicable Standard-ASTM D2265

Description -

The dropping point of a grease is the temperature at which it passes from a semi solid state to liquid state. Determine the cohesiveness of oil and thickener of a grease.

Features-

1. Capacity to test 6 samples at a time.

2. Temp range up to 400°C.

3. Microprocessor based PID temperature controller.

4. Fluorescent light placed at backside of aluminum block for higher visibility of the sample.

5. High quality insulation in the cabinet.

6. Weight - 22Kg

Product Details:

Cleaveland Flash Point and Fire Point Apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 800C as per specification IP36 and IS: 1448 (P: 69) 1969. The apparatusconsists of a cup, heating plate to spectificdimension thermometer clip and test flameattachment with swivel joint for passing over testliquid surface in the prescribed manner, Heatingis controlled by means of energy regulator fittedto the apparatus. Suitable for aperation on 220Volts 50 cycles AC Circuits.

Additional Information:

• Delivery Time: 3 weeks

Product Details:

Kinematic Viscometer Bath is used to maintain the correct constant Temperature for estimating kinematic Viscosity of Oils & Petroleum product. In this type ofbath Various Viscometers may be fixed as an internal part of bath.The bath is rectangular in shape . Insidetank made of Stainless steel sheet. On two sidestoughned glass provided for full visibility of objects.The bath is controlled by an electronic relay and Digtital Contraller Temperature range50C above room temperature to 1000 C. Accuracy ± 0.10C Stirring is done by a F.H.P.elect. motor stirrer. It is Supplied with Viscometer tube holders and S.S. cover.

Product Details:

Pensky Marten Flash Point Apparatus is made as per IP 34, ASTMD-93and IS 1448 (Part I)1270 (P.21) and IS1209-1953 methodB. Used for findingout Flash Pointabove 700 C andbelow 3000 C. TheInstrument havingOil Test Jet/Gas Test Jet Flame Device, stirrer with flexible shaft. The Assembly rests in Air Bath which is covered withDome shape metal top. The cup is fitted with insulated Handle and locking arrangementnear Cup flange. The assemble is kept on round shape electric heater with Seperatetemp.regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits

Product Details:

Aniline Point Apparatus is used to determine the aniline point of petroleum products and hydrocarbon solvents. Specified volume of Aniline and the sample is taken and placed in a tube and mixed mechanically. The mixture is heated at a controlled rate and the temperature at which two phases separate is recorded as the aniline point of that particular sample.

Product Details:

Distillation Apparatus is used for the determinations of distillation characterstics of petroleum products. The instrument consists of metal shield to support distillation flask with Geared Height Adjustable Device. It has a slot for vapour tube. A glass window is provided in front side for clear view of inside objects.It also has cooling bath or condensor with M.S. black painted stand. Electrically heated.The instrument is supplied with two square asbestos boards with 50mm and 70mm holes. (without glass wares)