Oil and Petroleum Equipment's

Product Details:

Bomb Calorimeter is used for determination of calorific value of liquid& Solid fuels.The Instrument consists S.S. Body made outof corrosion resisting stainless steel Rod cap. 300 ml,Calorimeter vessel, outer Jacket with insulated Body, offsetstirrer, S.S. Crucible, pellet press, igntion wire, pressuregauge, with flexible pipes. with electronic firring unit.

Product Details:

Redwood Viscometers are designed for viscosity tests of petroleum Products. They confirm to requirements of IP 70 (Former). Two adaption of RedWood viscometer are available No. 1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No. II for liquids whose flow time exceeds 2000 seconds.The complete out fit comprises Stainless steel bath with electrical heating arrangment suitable to operate at 220Volts AC Mains with tap,oil cup with precision stainless steel jet, cup cover, ball valve, thermometer-clip. Stirrer and M.S.Sheet stand

Product Details:

Saybolt Viscometer Apparatus: Made as per ASTMD-88 specifications with Universal and FurolJets made of Stainless Steel. Stirring is done by hand with turn table arrangement (without Strainer, with drawl Tube and glass wares).Suitable to operate on 220 Volts AC mains.

Product Details:

Penetrometer Apparatus is used for penetration test on a wide variety of materials. It consists of a head Support mounted on a vertical rod which can be adjusted for height.A rack and pinion and pointer assembly provides fine adjustment of needle tip to Sample and in Corporates a Slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter Sub Division. The Instrument is supplied with two sample containers & 2 Watts.

Additional Information:

• Delivery Time: 2-3 weeks

Product Details:

Cleaveland Flash Point and Fire Point Apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 800C as per specification IP36 and IS: 1448 (P: 69) 1969. The apparatusconsists of a cup, heating plate to spectificdimension thermometer clip and test flameattachment with swivel joint for passing over testliquid surface in the prescribed manner, Heatingis controlled by means of energy regulator fittedto the apparatus. Suitable for aperation on 220Volts 50 cycles AC Circuits.

Additional Information:

• Delivery Time: 3 weeks

Product Details:

Kinematic Viscometer Bath is used to maintain the correct constant Temperature for estimating kinematic Viscosity of Oils & Petroleum product. In this type ofbath Various Viscometers may be fixed as an internal part of bath.The bath is rectangular in shape . Insidetank made of Stainless steel sheet. On two sidestoughned glass provided for full visibility of objects.The bath is controlled by an electronic relay and Digtital Contraller Temperature range50C above room temperature to 1000 C. Accuracy ± 0.10C Stirring is done by a F.H.P.elect. motor stirrer. It is Supplied with Viscometer tube holders and S.S. cover.

Product Details:

Abels Flash Point Apparatus is suitable for determining the close cup flash point of petroleum and mixtures according to IP 33 and IP 170 and also IS 1448(Part I) 1985 (P:20). It is suitable for oils whose flashes below 700 C. It is supplied with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for operation on 220Volts AC Circuits.

Product Details:

Softening Point Apparatus is used for determination of softening point of bituminious materials according to IP 58 and IS 1205-1958. Softening point is that temperatureat which the speciman under test becomes soft enough to allow a steelball of specific dimensions to fall a required distance under test condition.The apparatus consists of glass beaker, ring Stand, two steel balls withrings and ball guides, hand Stirrer.

Product Details:

Cloud And Pour Point Apparatus is made according to specification laid by IP 15 & IS 1448 (P :10) 1970. The pour point is lowest temperature at which the oil will just fail to flow. The apparatus consists main cooling bath made out of S.S. sheet and stand unit with drain plug and cover has provision for fitting thermometer and a filling aperture for adding freezing mixture. A Glass jar for containing oils, Jacket, disc and gasket as specified are also provided.

Product Details:

Copper Strip Corrosion Test Apparatus: Double walled stainless steel chamber bath outer chamber made of mild steel sheet attractive painted. As per IP 154 and IS 1448(P - 15) to accomodate 3 & 6 Bombs. Temperature is controlled by Electronic Digital Controller (With out S.S. Bomb)

Product Details:

Pensky Marten Flash Point Apparatus is made as per IP 34, ASTMD-93and IS 1448 (Part I)1270 (P.21) and IS1209-1953 methodB. Used for findingout Flash Pointabove 700 C andbelow 3000 C. TheInstrument havingOil Test Jet/Gas Test Jet Flame Device, stirrer with flexible shaft. The Assembly rests in Air Bath which is covered withDome shape metal top. The cup is fitted with insulated Handle and locking arrangementnear Cup flange. The assemble is kept on round shape electric heater with Seperatetemp.regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits

Product Details:

Smoke Point Apparatus is used for the determination of Kerosene and other fuels. The sample is burned in an enclosed wick-fed lamp that is calibrated against pure hydrocarbon blends of known smoke point. The maximum height of the flame that can be achieved with the test fuel without smoking is determined to nearest 0.5mm

Product Details:

Purpose
Determines sediment content of crude oil and fuel oils by extraction with toluene.

Specifications

• 1000ml capacity
• Conforms to ASTM D473
• Stainless steel basket supporting an extraction thimble of alundum

Additional Information:

• Item Code: BABIR
• Delivery Time: 3-4

Product Details:

As per ASTM D445, the apparatus is used for determining kinematic Viscosity of transparent and opaque liquids by measuring the time for a volume of liquid to flow under gravity through calibrated glass capillary viscometer having its nominal constant under controlled temperature conditions. The kinematic Viscosity is a product of measured flowtime in seconds and calibration constant provided with Viscometer tube. Two determinations are taken from which the kinematic Viscosity is taken as average of the two determined values.

Additional Information:

• Delivery Time: 3-4 weeks

Product Details:

Digital Stormer Viscometer As Per Standard : IS : 101 ( Part 1 / Secs ) 1989 ASTM D 562
For measuring viscosity of non newtonion liquid such as Paints, Resins etc. Rotating Paddle driven by adjusting weights to determine viscosity. Viscosity in Krebs (KU) be get through Conversion Table.

•  Easy to use
•  Rotation at 200 rpm with audio and visual indication.
•  Rapid and accurate measurement of viscosity in krebs or centripoise.
•  Supplied with container and different weights
•  Tachometer Version
•  Digital RPM Display
•  Range : 800 5220 CPS
• 54 140 KU

Product Details:

High Temperature Dropping Point Apparatus

Applicable Standard-ASTM D2265

Description -

The dropping point of a grease is the temperature at which it passes from a semi solid state to liquid state. Determine the cohesiveness of oil and thickener of a grease.

Features-

1. Capacity to test 6 samples at a time.

2. Temp range up to 400°C.

3. Microprocessor based PID temperature controller.

4. Fluorescent light placed at backside of aluminum block for higher visibility of the sample.

5. High quality insulation in the cabinet.

6. Weight - 22Kg

Product Details:

Distillation Apparatus is used for the determinations of distillation characterstics of petroleum products. The instrument consists of metal shield to support distillation flask with Geared Height Adjustable Device. It has a slot for vapour tube. A glass window is provided in front side for clear view of inside objects.It also has cooling bath or condensor with M.S. black painted stand. Electrically heated.The instrument is supplied with two square asbestos boards with 50mm and 70mm holes. (without glass wares)

Product Details:

Drop Point Of Grease Apparatus consists of Brass Sleeve and case with metal cup,a glass and Boiling tube with Crok fitted to a bath 600 ml beaker is provided. The assembly is kept onheater with energy Regulator control and stand with F.H.P. elect Stirrer.As per IP 132 the unit Comprises a glass beaker with fibre Cover together withglass test tube with three identations to receive Chromium platedd brass cup. cork fortube and a 1.5 mm diameter Brass rod. The assembly is kept on heater with energyregulator and stand with F.H.P. motor stirrer.

Product Details:

Consists of stainless steel separation cup with cone of 240 mesh woven wire cloth, 100g metal weight and oil cup. Oil separation is determined by placing the sample on the wire mesh cone and loading it with the 100g metal weight.

Product Details:

ASTM D6184 - Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method) This test method covers the determination of the tendency of lubricating grease to separate oil at an elevated temperature. This test method shall be conducted at 100°C for 30 h unless other conditions are required by the grease specification.

Product Details:

Junker Gas Calorimeter works on the principle of burning of a known volume of a gas and imparting the heat with maximum efficiency to steadily flowing water and finding out of the rise in temperature of a measured volume of water. The Calorimeter is fixed on a tripod stand having leveling screws to keep the calorimeter in a fixed vertical condition. The Calorimeter mainly consists of a gas combustion chamber, heat exchanger and a water flow system. Two thermometers are provided in the temperature inlet and outlet ports

Product Details:

Carbon Residue Apparatus is useful to determine amount of Carbon Residue when an oil is evaporated under Specified Conditions. The apparatus consists of spun sheet iron crucible 25 c Capacity, Sheet Iron hood and sheet iron block on a stand, gas Burnor.

Product Details:

Reid Vapour Pressure Test Apparatus: Heated with FHP motor Stirrer temp. controlled by Electronic Digital Temp.Controller. The Apparatus consists one air chamber, one Liquid Chamberwithout cock and pressure gauge.

Additional Information:

• Item Code: RVP

Product Details:

Carbon Residue Apparatus made as per IP 14, ASTM 524 and IS 1448 (P: 8)- 1967Standrads. The apparatus consists of a solid metal bath having 5wells to accomodate cocking bulbs, The heavy duty heating elements provided around the bath. Supplied with 5 cocking bulbs, and onesyringe.

Product Details:

Aniline Point Apparatus is used to determine the aniline point of petroleum products and hydrocarbon solvents. Specified volume of Aniline and the sample is taken and placed in a tube and mixed mechanically. The mixture is heated at a controlled rate and the temperature at which two phases separate is recorded as the aniline point of that particular sample.